Andmebaasi logo
 

Compositional evaluation of hot-pressed rapeseed cake for the purpose of bioplastic production

dc.contributor.authorJõgi, Katrin
dc.contributor.authorMalenica, Dunja
dc.contributor.authorJõudu, Ivi
dc.contributor.authorBhat, Rajeev
dc.contributor.departmentChair of Food Science and Technology. Institute of Veterinary Medicine and Animal Sciences. Estonian University of Life Scienceeng
dc.contributor.departmentERA-Chair for Food (By-) Products Valorisation Technologies of the Estonian University of Life Sciences (VALORTECH). Estonian University of Life Scienceseng
dc.date.accessioned2021-05-10T08:43:28Z
dc.date.available2021-05-10T08:43:28Z
dc.date.issued2021
dc.descriptionReceived: January 29th, 2021 ; Accepted: April 10th, 2021 ; Published: April 13th, 2021 ; Correspondence: katrin.jogi@student.emu.eeeng
dc.description.abstractRapeseed is widely cultivated for biodiesel or food-grade oil production. As the oil production process generates huge amounts of wastes and by-products (e.g. oil press cake and meal) that have relatively high crude protein content, valorisation as input material for protein-based bioplastics has a lot of potential. There is a limited number of studies undertaken on using rapeseed cake directly (without prior protein extraction) for biomaterial production, but the initial results have been very promising. As rape and turnip rapeseeds are also some of the most harvested crops in Estonia, the rapeseed oil press cake as a by-product is also available from local food-grade rapeseed oil production. In this regard, we investigated locally available rapeseed oil press cake for chemical composition and explored suitability for bioplastic production. The results indicate suitability for direct biomaterial production, meaning properties for biomaterial formation could be further explored.eng
dc.description.sponsorshipThis work was supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 810630: ERA Chair for Food (By-) Products Valorisation Technologies of the Estonian University of Life Sciences (VALORTECH). In addition, funding received from Mobility Plus ERA-Chair support (Grant no. MOBEC006 ERA Chair for Food (By-) Products Valorisation Technologies of the Estonian University of Life Sciences) is also gratefully acknowledged.eng
dc.identifier.issn1406-894X
dc.identifier.publicationAgronomy Research, 2021, vol. 19, Special Issue 1, pp. 788-794eng
dc.identifier.urihttp://hdl.handle.net/10492/6484
dc.identifier.urihttps://doi.org/10.15159/ar.21.033
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) ; openAccesseng
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectbiomaterialeng
dc.subjectbioplasticeng
dc.subjectby-producteng
dc.subjectrapeseed cakeeng
dc.subjectvalorisationeng
dc.subjectarticleseng
dc.titleCompositional evaluation of hot-pressed rapeseed cake for the purpose of bioplastic productioneng
dc.typeArticleeng

Failid

Originaal pakett

Nüüd näidatakse 1 - 1 1
Laen...
Pisipilt
Nimi:
Compositional evaluation of hot pressed rapeseed cace for the purpose of bioplastic production_ AR Vol19_S1_Jogi.pdf
Suurus:
93.46 KB
Formaat:
Adobe Portable Document Format
Kirjeldus:
Article

Kollektsioonid