Rakendustarkvara sünteetilise generaatori juhtimiseks
Laen...
Kuupäev
2019
Kättesaadav alates
6.09.2019
Autorid
Ajakirja pealkiri
Ajakirja ISSN
Köite pealkiri
Kirjastaja
Eesti Maaülikool
Abstrakt
Magistritöös käsitletakse sünteetilise generaatori seadmete juhtimisvõimalusi LabView
tarkvarakeskkonna abil. Kirjeldatakse Eesti Maaülikooli digitaalelektroonika
seadmevaheline andmeside võimalused ja kasutatavate seadmete juhtimispõhimõte.
Tutvustatakse seadmete andmevahetuse võrgu ehitusega, antakse ülevaade seadmetest,
andmete formaadist ja andmehõive süsteemi töö algoritmist. Sünteetilise generaatori
sideühenduse loomiseks valiti Modbus protokoll ja selle alusel luuakse seadmete
juhtimisprogrammi. Kirjeldatakse LabVIEW keskkonnas juhtimisprogrammi
koostamiseks kasutatud skeemi elemente ja nende mõju programmi algoritmile.
LabVIEW tarkvarakeskkonnas loodud programmi peab läbima testimise ja peale seda
tehakse järeldused sünteetilise generaatori juhtimisprogrammi võimekusest.
The Master's thesis discusses the control possibilities of the synthetic generator devices with the help of LabView software environment. In addition, this document describes examples of possible connection between the equipment and the control equipment used principle. Introducing the equipment data exchange network construction, equipment overview, data format, and data acquisition system operation algorithm. The Modbus protocol was selected to establish the synthetic generator communications and a device control program was created on the basis of it. Describes the schematic elements of the LabVIEW software environment that were used in the process of creating the control program of a synthetic generator and their influence on the program algorithm. The control program created in the LabVIEW software environment must pass the testing and after that can made conclusions about program control capability of the synthetic generator.
The Master's thesis discusses the control possibilities of the synthetic generator devices with the help of LabView software environment. In addition, this document describes examples of possible connection between the equipment and the control equipment used principle. Introducing the equipment data exchange network construction, equipment overview, data format, and data acquisition system operation algorithm. The Modbus protocol was selected to establish the synthetic generator communications and a device control program was created on the basis of it. Describes the schematic elements of the LabVIEW software environment that were used in the process of creating the control program of a synthetic generator and their influence on the program algorithm. The control program created in the LabVIEW software environment must pass the testing and after that can made conclusions about program control capability of the synthetic generator.
Kirjeldus
Magistritöö
Energiakasutuse õppekaval
Märksõnad
magistritööd, taastuvenergia seadmed, energia juhtimine, tööstuslik andmeside