Andmebaasi logo
 

Thermoanalytical investigation of selected fuel during isothermal heating

Lühendatud kirje lehekülg
dc.contributor.authorVitázek, I.
dc.contributor.authorOndro, T.
dc.contributor.authorSunitrová, I.
dc.contributor.authorMajdan, R.
dc.contributor.authorŠotnar, M.
dc.date.accessioned2020-01-08T07:33:29Z
dc.date.available2020-01-08T07:33:29Z
dc.date.issued2019
dc.descriptionArticleeng
dc.description.abstractThe thermal decomposition of woody biomass was studied using pellets made from residual processing spruce wood (Picea abies). The samples were studied using thermogravimetric analysis in the isothermal regime at the temperatures 275 °C, 300 °C, 325 °C, and 350 °C, which corresponds to the main decomposition region. The results show that the main decomposition region can be described as a volatilisation of the main constituents at a temperature higher than 300 °C. Otherwise, the results indicate, that the lignin does not decompose at lower temperatures. Therefore, it can be concluded that the heating rate is one of the most important parameters that affect the thermal decomposition of lignin and could lead to different interpretations if non-isothermal measurements are used.eng
dc.identifier.issn1406-894X
dc.identifier.publicationAgronomy Research, 2019, vol. 17, no. 6, pp. 2455–2459eng
dc.identifier.urihttp://hdl.handle.net/10492/5520
dc.identifier.urihttps://doi.org/10.15159/ar.19.216
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) ; openAccess
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectwoody biomasseng
dc.subjectthermogravimetric analysiseng
dc.subjectspruce woodeng
dc.subjectarticleseng
dc.titleThermoanalytical investigation of selected fuel during isothermal heatingeng
dc.typeArticleeng

Failid

Originaal pakett

Nüüd näidatakse 1 - 1 1
Pisipilt
Nimi:
AR2019_Vol17No6_Vitazek.pdf
Suurus:
264.21 KB
Formaat:
Adobe Portable Document Format
Kirjeldus:
Article
Lae alla

Kollektsioonid

2019, Vol. 17, No. 6