Andmebaasi logo
 

3D-printeri töölaua arendus

dc.contributor.advisorSoots, Kaarel
dc.contributor.authorKütt, Sander
dc.date.accessioned2018-06-01T06:36:18Z
dc.date.available2018-06-01T06:36:18Z
dc.date.defensed2018-06-03
dc.date.issued2018
dc.descriptionRakenduskõrgharidusõppe lõputöö Tehnotroonika õppekavalest
dc.description.abstractKäesoleva lõputöö eesmärgiks on projekteerida kaughaldusega juhitav lisaseade 3Dprinditud detaili eemaldamiseks 3D-printeri töölaualt. Vajadus lisaseadme tarbeks tulenes autori isiklikest kogemustest. Detaili valmimisel tuleb 3D-printeri opertaatoril sekkuda ja töölaualt valminud objekt manuaalselt eemaldada. Käesolevas lõputöös projekteeritud lisaseademe tähtsamad komponendid on juhtarvuti, 3D-prinditavad kronsteinid, elektrimootor ja polüvinüülkloriid transportöörlint. Töö käigus viis autor läbi turuuuringu, valis 3D-printeri, millele lisaseadet projekteerima hakatakse, püstitas nõuded projekteeritavale lisaseadmele, modifitseeris vabavaralist tarkvara ja projekteeris lisaseadme mehaanilise osa.est
dc.description.abstractThe purpose of this thesis is to design a remote control accessory for removing the 3Dprinted objects from the 3D-printers build plate. The need for an accessory came from the author's personal experiences. When the printing of 3D-object is completed, the 3Dprinter operator must interfere and remove the object from the build plate manually. The most important components of the designed auxiliary device are a computer, 3D-printable brackets, an electric motor and a polyvinyl chloride conveyor belt. During the work, the author carried out a market survey, chose a 3D-printer to which the auxiliary device will be designed, set up the requirements for the projected accessory, modified the freeware software, and engineered the mechanical parts of the auxiliary device.eng
dc.identifier.urihttp://hdl.handle.net/10492/4351
dc.publisherEesti Maaülikool
dc.subjectlõputöödest
dc.subjectkolmemõõtmeline printimineest
dc.subjecttarkvaraest
dc.title3D-printeri töölaua arendusest
dc.title.alternativeDevelopment of the 3D-printer build plateeng
dc.typeBachelor Thesis

Failid

Originaal pakett

Nüüd näidatakse 1 - 1 1
Laen...
Pisipilt
Nimi:
Sander_Kütt_2018RAK_TS_täistekst.pdf
Suurus:
2.12 MB
Formaat:
Adobe Portable Document Format
Kirjeldus:
Täistekst