Andmebaasi logo
 

Extraction of oil from rapeseed using duo screw press

Lühendatud kirje lehekülg
dc.contributor.authorMizera, Č.
dc.contributor.authorHerák, D.
dc.contributor.authorHrabě, P.
dc.contributor.authorKabutey, A.
dc.date.accessioned2018-04-11T12:26:55Z
dc.date.available2018-04-11T12:26:55Z
dc.date.issued2018
dc.descriptionArticleeng
dc.description.abstractThis study was focused on the analysis of optimize the pressing process of rapeseeds ( B rassica napus L.) using screw press. For pressing of oil a screw press Farmer 20 – duo (Farmer 20, Farmet a.s., Ceska Skalice, Czech republic) was used. The screw rotation speed 10, 20, 30, 40, 55 and 65 rpm was used. Oil recovery efficiency and specific mechanical energy were decreased when the seed material troughput was increased. It has been found that the optimal operation point for screw press Farmer 20 – duo was at 20 kg h - 1 rapeseed throughput. The specific mechanical energy at the optimal operation point was 0.61 kWh kg oil - 1 Maximum oil recovery efficiency 82.6% was found at the lowest screw speed.eng
dc.identifier.issn1406-894X
dc.identifier.publicationAgronomy Research, 2018, vol. 16, Special Issue 1, pp. 1118-1123eng
dc.identifier.urihttp://hdl.handle.net/10492/3879
dc.identifier.urihttp://dx.doi.org/10.15159/ar.18.059
dc.rights.holderCopyright 2009 by Estonian University of Life Sciences, Latvia University of Agriculture, Aleksandras Stulginskis University, Lithuanian Research Centre for Agriculture and Forestry. No part of this publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical, incl. photocopying, electronic recording, or otherwise without the prior written permission from the Estonian University of Life Sciences, Latvia University of Agriculture, Aleksandras Stulginskis University, Lithuanian Research Centre for Agriculture and Forestryeng
dc.subjectFarmer 20eng
dc.subjectoil recovery efficiencyeng
dc.subjectpressing energyeng
dc.subjectarticleseng
dc.titleExtraction of oil from rapeseed using duo screw presseng
dc.typeArticleeng

Failid

Originaal pakett

Nüüd näidatakse 1 - 1 1
Pisipilt
Nimi:
Vol16S1_20.pdf
Suurus:
603.24 KB
Formaat:
Adobe Portable Document Format
Kirjeldus:
Article
Lae alla

Kollektsioonid

2018, Vol. 16, Special Issue 1