Determination of residual stresses in coatings of rigidly clamped rods and plates by measuring strain: [full text in Russian]
Laen...
Kuupäev
1975
Kättesaadav alates
Autorid
Ajakirja pealkiri
Ajakirja ISSN
Köite pealkiri
Kirjastaja
Институт проблем прочности НАН Украины
Abstrakt
Residual stresses in clamped rod and plate coatings can be determined by using a known method of deflection measurement, developed further in papers [2-7]. However, the wide application of strain gauges in modern measurement technology justifies in many cases the use of the proposed method. It is based on measurement of the strain arising on the free side of the substrate when the clamped edges becom free after building up the coatings up to required thicknesses. Metrological equations are derived and an example of determination of residual stress for a coating is presented.
Note. The translation of this article is available at Springer (see Strength of Materials 7, 577-580 (1975)).
Note. The translation of this article is available at Springer (see Strength of Materials 7, 577-580 (1975)).
Kirjeldus
Märksõnad
articles