Andmebaasi logo

Determination of the tension limit forces of a barley malt and a malt crush in correlation with a load size




Kättesaadav alates


Hromasova, M.
Vagova, A.
Linda, M.
Vaculik, P.

Ajakirja pealkiri

Ajakirja ISSN

Köite pealkiri



This article deals with determination of selected parameters of barley malt (whole grain and crushed grain). The barley malt is besides water, hops and brewer's yeast, one of the basic ingredients necessary for the production of traditional Czech pilsner type of beer. The aim of this research is to determine limit force and internal friction angle with depending on the size of the load. The assessed malt crush was produced using a 2-roller malt mill. The 2-roller malt mill is based on the principle of grinding the material in a milling gap between two milling rollers, which is a very commonly used production of the malt crush. By determining the tension limits of the barley malt and the malt crush in correlation with the load, we can obtain very important parameters that inform us of the bulk material behavior, particularly with respect to the storage method (storage shape, height of the stored material layer, and the removal method from the storage, etc.), and to the transport (route gradient, transport speed, etc.). The determination of the tension limits has a direct link with cohesion of the bulk material and thereby contributes to establishing of the basic parameters of the bulk material, such as - the friction angle. The measurement for the angle of internal friction determination were performed on a prototype device. The principle of measurement on a mobile prototype devices is, the upper square chamber slides down the lower square chamber. Barley malt (whole grain and crushed grain) were loaded from 100 g to 5,000 g. The results of measuring were statistically analyzed with software Statistica 12.




food industry, barley malt, malt crush, bulk material, friction angle, articles