Andmebaasi logo
 

The advanced application of the wood-originated wastewater sludge

Laen...
Pisipilt

Kuupäev

2020

Kättesaadav alates

Autorid

Brovkina, J.
Shulga, G.
Ozolins, J.
Neiberte, B.
Verovkins, A.
Lakevics, V.

Ajakirja pealkiri

Ajakirja ISSN

Köite pealkiri

Kirjastaja

Abstrakt

The wood hydrothermal treatment is one of the plywood production’s stages, which resulting in the production of wastewater containing such components as hemicelluloses, lignin and wood extractive substances (HLES). It is necessary to improve the wastewater treatment technology with the aim to enhance the yield of sludge from plywood wastewater for its effective and rational recycling. In the present study, the optimal coagulation conditions for the HLES removal have been found using the developed aluminium salt-based coagulant. The developed composite coagulant is characterized by lower doses, a wide range of the work pH values, the insensitivity against temperature changes and a higher coagulation efficacy compared with traditional aluminium salts. The proposed treatment technology generates many tons of woodoriginated sludge – a biomass coagulate. It was found that the formed coagulate produced in the process of wastewater treatment can increase the sorption ability of clay. The optimal content of the dry coagulate in a clay sorbent does not exceed 0.11%. The sorption capacity of the developed sorbent for water, rapeseed and silicone oil increases by 35%, 31% and 21%, respectively, relative to the unmodified clay sorbent. The sorption efficiency of heavy metals from water solutions is also increased by 10–12%. The thermal treatment of the modified clay sorbent at the high temperature leads to an increase in its sorption capacity for oil products.

Kirjeldus

Märksõnad

coagulation, composite coagulant, woodworking wastewater, sludge, clay sorbent, articles

Viide