Analytical study of soil strain rate with a ploughshare for uncovering slit
Laen...
Kuupäev
2020
Kättesaadavus
Ajakirja pealkiri
Ajakirja ISSN
Köite pealkiri
Kirjastaja
Estonian Academic Agricultural Society
Abstrakt
The article is devoted to solving one of the most important tasks of substantiating rational design and technological parameters of the working body for the installation of elements of subsurface irrigation. To reduce the frictional resistance during pulling of intra-soil irrigation communications, it becomes necessary to form a cavity inside the soil. The energy efficiency of such a process is determined by the traction resistance and directly depends on the normal and shear stresses of the soil as a result of its relative deformation during interaction with a special working body – the share of a mole plough. The geometric shape and kinematic parameters of the share, together with the mechanical characteristics of the soil, have the greatest influence on the nature of the relative deformation. Therefore, the purpose of the article is to determine the functional dependences of the components of the soil deformation rates on the geometric and kinematic parameters of the working body surface. These equations are necessary to determine the stress components in the soil, which make it possible to determine the compaction of the soil on the walls of the formed cavity (molehill), as well as the components of the forces of resistance to the movement of the working body.
Kirjeldus
Saabunud / Received 20.10.2020 ; Aktsepteeritud / Accepted 18.11.2020 ; Avaldatud veebis / Published online 20.11.2020 ; Vastutav autor / Corresponding author: Ihor Kupchuk e-mail: kupchuk.igor@i.ua
Märksõnad
subsoil irrigation, trenchless laying, molehill, geometric parameters, share, soil deformation rate, articles