Andmebaasi logo
 

Determination of Residual Stresses in Brush-Plated Coatings by Mechanical and X-ray Techniques

Lühendatud kirje lehekülg
dc.contributor.authorLille, Harri
dc.contributor.authorKõo, Jakub
dc.contributor.authorHaav, Aksel
dc.date.accessioned2018-02-01T13:57:19Z
dc.date.available2018-02-01T13:57:19Z
dc.date.issued1997
dc.description.abstractThe determination of residual stresses is studied in brush-plated nickel coatings of different thickness, deposited on brass strip substrates with two different dimensions. Residual stresses in the surface layer were found by the deformation method, displacement of the free end of the coated region of the cantilevered strip substrate or the axial strain of the free surface serving as experimental information. The x-ray diffraction technique was employed to determine residual stresses in specimens (8x10 mm) cut from the middle of the coated strip substrate by using lattice parameters measured for two different ψ values. Comparable values of residual stresses, 350-450 MPa and 280-480 MPa, were obtained in coating with a thickness of 45-110 μm by using the mechanical method and the x-ray diffraction technique respectively.eng
dc.identifier.issn91-7219-211-9
dc.identifier.publicationThe Fifth International Conference on Residual Stresses : ICRS-5. Volume 2.- Linköping : Linköping University, 1997, pp. 1012-1017.eng
dc.identifier.urihttp://hdl.handle.net/10492/3799
dc.publisherLinköping Universityeng
dc.rightsCreative Commons Attribution 4.0 International (CC BY 4.0)eng
dc.rightsinfo:eu-repo/semantics/openAccesseng
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/eng
dc.subjectarticleseng
dc.titleDetermination of Residual Stresses in Brush-Plated Coatings by Mechanical and X-ray Techniqueseng
dc.typeinfo:eu-repo/semantics/articleeng

Failid

Originaal pakett

Nüüd näidatakse 1 - 1 1
Pisipilt
Nimi:
Koo_Jakub_Article_1012-1017.pdf
Suurus:
443.87 KB
Formaat:
Adobe Portable Document Format
Kirjeldus:
Article
Lae alla

Kollektsioonid

Jakub Kõo