Andmebaasi logo

Sirvi Autor "Muntean, A." järgi

Nüüd näidatakse 1 - 3 3
  • Pisipilt
    Kirje
    Influence of raw material properties on the quality of solid biofuel and energy consumption in briquetting process
    (2017) Muntean, A.; Ivanova, T.; Hutla, P.; Havrland, B.
    The present paper is related to a pressing process research of raw materials with different density in order to investigate impact of biomass density on a formation of monolithic structure and the briquette’s strength. Another focus of the study is an influence of raw materials particles’ size on agglomeration process and quality of final product. Different biomass materials like two varieties of miscanthus, industrial hemp and apple wood were selected for experimental purposes of this research. Mechanical durability which represents one the main indicator of briquettes’ mechanical quality (strength) was determined. The research was conducted using hydraulic piston briquetting press. For assessment of briquetting efficiency during the whole process energy consumption was measured. One of the most important factors that can affect briquetting process is the temperature of pressing chamber which was registered as well. The main goal of the research was practical study of possibilities for increasing production efficiency and quality of briquettes on hydraulic piston briquetting press with respect to optimization of particles’ size of raw materials and use of raw materials the most appropriate density.
  • Pisipilt
    Kirje
    Particle size distribution analysis of pine sawdust: comparison of traditional oscillating screen method and photo-optical analysis
    (2018) Chaloupková, V.; Ivanova, T.; Muntean, A.
    Particle size and particle size distribution (PSD) are crucial parameters which affect properties of particulate and agglomerated materials, and have an impact on a quality and utilization of a final product. The aim of this paper was to determine PSD as well as to assess dimensional features of pine sawdust fractions via mechanical sieve analysis and photo-optical analysis. The first one is a traditional and standard method taking into account only one parameter of particle shape and the second one is a modern method based on a digital image processing that considers also irregular shapes of biomass particles. Pine sawdust was grinded into three fractions: 4, 8 and 12 mm and analysed using two mentioned methods. A horizontal vibrating sieve shaker comprising 11 sieves and a bottom pan was used, and the obtained data of retained particles on each sieve were evaluated. For comparison, a computerized photo-optical particle analyser was applied with max Feret’s diameter as a measurement algorithm for a particle length, and PSD was analyzed by grouping the particles according to their distinct lengths adjusted to the sieves’ sizes used in the screening method. Moreover, additional results in dimensions and parameters of PSD were obtained and evaluated through the photo-optical method. Pine sawdust particles can be described as non-uniform, mainly prolonged, finer particles dominated in all fraction samples. The study showed differences in the results, inaccuracy and other drawbacks of the conventional sieving method such as clogging and falling-through phenomena as well as the limitations of the machine vision. Strong sides of both methods were discussed, too. Overall, the results contributed to a better knowledge of the material properties and different methods of PSD analysis.
  • Pisipilt
    Kirje
    Research on solid biofuels from cotton waste biomass – alternative for Tajikistan’s energy sector development
    (2017) Akhmedov, S.; Ivanova, T.; Krepl, V.; Muntean, A.
    An increasing awareness of the negative environmental cost associated with the combustion of fossil fuels and concerns over the geopolitical instability of the main oil producing regions is driving the development of renewable energy sources and biofuels. Use of solid biofuels made of different types of biomass became perspective alternative to conventional fuels in many countries. Such positive indicators as low cost of the final product that meets the quality of standards, not capital intensive production, possibility of producing briquettes/pellets from almost any agricultural waste or combination of raw materials are undoubted advantages of biomass based fuels. The main challenges for Tajikistan’s energy sector, which is depended on energy imports, are: to increase energy supply through better exploitation of hydropower and other renewable energy sources such as wind, solar and primary biofuels. Within the agricultural sector of Tajikistan, which is highly agrarian country, cotton accounts for 60% of agricultural output. According to the Ministry of Agriculture of Tajikistan 199,400 hectares of lands have been allocated to cotton cultivation in the year of 2014. Plenty of unused cotton residual biomass could be effectively utilized for winter heating in rural areas. The main focus of the research was to investigate and assess physical, chemical and mechanical properties of pellets and briquettes produced form cotton waste biomass.