Sirvi Autor "Klava, D." järgi
Nüüd näidatakse 1 - 5 5
Tulemused lehekülje kohta
Sorteerimisvalikud
Kirje Changes in the nutritional value of breakfast cereals containing germinated spring grain flakes during storage(2018) Kruma, Z.; Galoburda, R.; Tomsone, L.; Gramatina, I.; Senhofa, S.; Straumite, E.; Klava, D.; Kince, T.; Cinkmanis, I.; Zagorska, J.; Kunkulberga, D.Th e aim of current research was to assess the nutritional value of breakfast cereals containing germinated spring grain flakes and its changes after 6 month storage. Three types of breakfast cereals were prepared and packaged in two types of Standup pouches – Pap50g/Alu7/Pe60 (AL), Pap40g/PELD20/PE40 (PE). For the accelerated shelf life test the samples were stored at 35 ± 2 °C and dietary fibre, protein, fat, B - group vitamins, sugars, total phenol content and DPPH, ABTS+ radical scavenging activity were dete rmined. Developed breakfast cereals have high nutritional value and all are high in fibre and thiamine. Additionally, sample S2 is source of protein, riboflavin, niacin, and S3 – is source of riboflavin and high in niacin. Comparing total phenolic content and antioxidant capacity of tested samples S3 showed the highest values. Storage and selected packaging influenced stability of nutrients, and for S1 and S2 AL showed bett er results whereas for S3 – PE.Kirje Effect of high pressure processing on raw pork microstructure and water holding capacity(2019) Sazonova, S.; Gramatina, I.; Klava, D.; Galoburda, R.High pressure processing (HPP) is widely used as an alternative to thermal food preservation technologies, including processed meats treatment. This technology affects food texture and water-holding capacity, which may have beneficial effect on product yield. After thermal treatment, meat partially releases water together with water-soluble proteins, which is concerned as a loss. It is very important not only because of changes in taste properties, but also economic aspects such as reduced final product weight. The aim of the study was to evaluate changes in the meat microstructure and water-holding capacity upon high pressure treatment. Pork samples were treated at various pressures and holding times, namely, 300 and 600 MPa with a 1 and 15 minutes holding time at each pressure. Untreated sample was regarded as a control. Microstructure of pork meat was evaluated after the paraffination of the samples. Fibre cross section area and space between fibres were measured and reported. Water-holding capacity was measured by centrifugation of meat samples over filter and calculating released amount of juice. Results indicated that fibre size did not change significantly after treatment at 300–600 MPa pressure comparing to the control sample – untreated meat. However, high pressure can affect hydrophobic properties of myofibrillar protein. The experimental results showed that waterholding capacity increases with the high pressure treatment. It is an important issue in meat processing industry, because HPP treatment allows reducing the water loss in fresh pork.Kirje Effects of processing conditions on physical parameters of triticale flakes(2018) Kince, T.; Straumite, E.; Klava, D.; Kruma, Z.; Abelniece, K.; Balgalve, A.Consumer interest in breakfast cereal flakes has increased during the last few years. Various technologies, used to produce flakes, significantly influence their quality parameters and shelf - life stab ility. The main purpose of the present research was to investigate how different processing methods affect the physical parameters of triticale flakes. For obtaining the flakes, cleaned whole triticale grains were treated using the following technologies: dry processing (hot air), steam processing and soaking with subsequent steaming. For preparing the flakes different kilning methods and traditional flaking rolls were used. Traditionally made rolled and dried whole grain triticale flakes were analysed as a control sample. Using standard methods, the flakes’ moisture content, water activity, microstructure, swelling capacity and colour changes were analysed. The gap settings of flake rollers do not influence significantly ( P < 0.05) changes of starch during processing. However, the starch granules were fully transformed into sugars in the flake samples with greater thickness. Non - significant ( P < 0.05) steaming and hot air drying (toasting) conditions’ effects were observed on the changes of the starch granules during processing. Strong correlation was determined during the analysis of water activity and moisture content. The moisture content of the ready - to - eat flakes varied from 2.54% to 10.66%, and the water activity value was from 0.108 to 0.494. Compared with traditionally processed flakes (control sample) the colour of the flakes prepared using other technologies changed significantly, the E values varied from 9.587 to 18.554. The colour of the soaked - steamed - rolled - hot air dried samples was similar but those significantly differed from the colour of soaked - dried - rolled - hot air dried flake samples. The soaked - dried - rolled - hot air dried flakes were darker compared with other analysed flake samples.Kirje Influence of technological parameters on chemical composition of triticale flakes(2018) Kruma, Z.; Straumite, E.; Kince, T.; Klava, D.; Abelniece, K.; Balgalve, A.Triticale is hybrid crop developed by crossing wheat ( Triticum ) and rye ( Secale ) and in last years it become more popular for food applications, including flake production. Different approaches are developed to improve flakes technology by applying different cooking, rolling, toasting parameters resulting in high quality products. All these technologies influence also nutrition quality of product due to the diffe rent stability of these compounds during mechanical and thermal treatment. The aim of current experiment was to investigate the influence of technological parameters on chemical composition of triticale flakes. In current experiment triticale grains and tr iticale flakes obtained by different technologies was tested. For evaluation of the influence of technological parameters, different flaking and rolling parameters were tested. For all samples were determined composition of basic nutrients (fats, proteins, fibres, sugars, ash), minerals (Ca, Mg, K, Zn, P), vitamins, total phenolics and antioxidant activity. Triticale has high nutritional quality, containing significant amounts of protein, fibres, vitamins and minerals. Technological processes significantly influence cereals composition, but it depends on parameters tested. Control sample showed lower results and hierarchical cluster analyses showed that samples 1/3/1, 2/1/2/1, 2/1/3/1, 2/1/4/1 are similar in composition of bioactive compounds. Results showed that for selection of the best method for flaking physical and/or sensory properties should be taken in account.Kirje Investigation of extruded cereals enriched with plant by-products and their use in fermented beverage production(2019) Konrade, D.; Lidums, I.; Klava, D.; Ence, E.; Kirse-Ozolina, A.The aim of the study was to analyse the quality of extruded cereals enriched with plant by-products and to obtain fermented drinks from production rejects. Extrusion was performed with co-rotating twin-screw extruder (compression ratio 8:1) at MILZU Ltd. from rye and oat flour (80:20, control samples) with addition of apple (ABF), carrot (CBF) and pumpkin (PBF) by-product flour in various amounts (10%, 15% and 20%). Naturally fermented kvass production process was used for non-alcoholic fermented beverage production. Total dietary fibre (TDF), textural properties and sensory features of extruded products after addition of by-products (BP) were determined. Dry matter, active acidity and sensory properties were analysed in fermented beverages. The obtained results showed a 12-55% increase in TDF of extruded cereals (11.8 g 100 g -1 ) after addition of plant by-products. All extruded samples with BP showed lower hardness levels than control (35.55 ± 2.95 N); samples with PBF were the least hard (P < 0.05). Samples with the lowest bulk density were obtained by the addition of 10% and 15% PBF, and 15% CBF, whereas addition of apple by-product flour in all tested concentrations gave the samples a higher bulk density compared to control. Highest taste and aftertaste scores using 5-point hedonic scale were given to samples with addition of 15% and 20% ABF, which also showed high consumer acceptance. With regards to fermented drinks, the highest dry matter content was found in PBF and ABF drink, 8.1 ± 0.1 and 7.0 ± 0.1, respectively. Sensory evaluation of fermented beverages showed that the intensity of flavour, acidity and aroma was most pronounced in sample with ABF, whereas colour was most pronounced in sample with PBF. In order to reduce production costs, it is possible to use production rejects of extruded cereals enriched with plant by-products to obtain new products.