2020, Vol. 18, Special Issue 3
Selle kollektsiooni püsiv URIhttp://hdl.handle.net/10492/6066
Sirvi
Sirvi 2020, Vol. 18, Special Issue 3 Autor "Anikina, A." järgi
Nüüd näidatakse 1 - 1 1
Tulemused lehekülje kohta
Sorteerimisvalikud
Kirje The usage of a binder system for frozen berries in the manufacture of confectionery(2020) Kremenevskaya, M.; Аret, V.; Tambulatova, E.; Sosnina, O.; Shkotova, T.; Kuprina, E.; Makeeva, I.; Manuylov, A.; Kipchatova, M.; Anikina, A.The aim of the research was to create binding systems for confectionery using gelling agents. The possibility of using partially hydrolyzed liquid egg white (egg hydrolyzate) in the binding system of gelling agents (egg hydrolyzate - agar (EG-A), egg hydrolyzate - starch (EG-S)) was determined to obtain the required mechanical characteristics when creating coatings, ornaments or fillers in confectionery with whole berries or pieces of fruit. In this regard, a technology has been developed for the hydrolysis of liquid egg white in the presence of an acidic reagent. The best rheological characteristics of the gelling agent from egg white were obtained under the following hydrolysis conditions: egg white : 1% HCl ratio = 1:2, process temperature - 66°C, duration - 40 minutes, the pH of the egg hydrolyzate was 6.53, the amount of dry solids was 11.78%. The newly created systems with agar (E406, Germany), chemically modified food starch (E1442, Germany) and hydrolyzed egg white (egg hydrolyzate) allow to adjust the properties of the coating for quick-frozen berries used in semi-finished confectionaries or cakes. It is established that the coating for quick-frozen berries, which includes a system consisting of 1% E406 and 0.5% egg hydrolyzate, should be carried out in 2 stages. In the first stage, a 10-minute exposure of the coating, which has a tensile strength of 580 g cm-2 , allows to create a strong capsule around the berry, which prevents the processes of destruction from proceeding. The second stage is necessary to obtain a uniform surface coating of the semi-finished mix from the berries. In this case, the tensile strength of the coating should be 480 g cm-2 . The system created from the E1442 and egg hydrolyzate gelling agents was also used in 2 stages when making cakes, which were subsequently baked at 180 °C. The content of the binding system in the coating applied to the test substrate was 6.9–7.7%, the effective viscosity of the coating was 120–180 Pa s. The content of the binding system in the coating of the surface of the berries in the second stage was 5.2–6.3% with effective viscosity values of 50–90 Pa s. Semi-finished berry products and ready-made baked cakes, produced with developed binding systems, can be stored at -8 °C for 10 to 12 days. After refrigerated storage, the separated moisture was not observed in the test samples. The absence of the phenomenon of syneresis with the indicated proportions of the introduction of gelling agents in coating systems has been established.