Rakendustarkvara sünteetilise generaatori juhtimiseks
Abstract
Magistritöös käsitletakse sünteetilise generaatori seadmete juhtimisvõimalusi LabView
tarkvarakeskkonna abil. Kirjeldatakse Eesti Maaülikooli digitaalelektroonika
seadmevaheline andmeside võimalused ja kasutatavate seadmete juhtimispõhimõte.
Tutvustatakse seadmete andmevahetuse võrgu ehitusega, antakse ülevaade seadmetest,
andmete formaadist ja andmehõive süsteemi töö algoritmist. Sünteetilise generaatori
sideühenduse loomiseks valiti Modbus protokoll ja selle alusel luuakse seadmete
juhtimisprogrammi. Kirjeldatakse LabVIEW keskkonnas juhtimisprogrammi
koostamiseks kasutatud skeemi elemente ja nende mõju programmi algoritmile.
LabVIEW tarkvarakeskkonnas loodud programmi peab läbima testimise ja peale seda
tehakse järeldused sünteetilise generaatori juhtimisprogrammi võimekusest. The Master's thesis discusses the control possibilities of the synthetic generator devices
with the help of LabView software environment. In addition, this document describes
examples of possible connection between the equipment and the control equipment used
principle. Introducing the equipment data exchange network construction, equipment
overview, data format, and data acquisition system operation algorithm. The Modbus
protocol was selected to establish the synthetic generator communications and a device
control program was created on the basis of it. Describes the schematic elements of the
LabVIEW software environment that were used in the process of creating the control
program of a synthetic generator and their influence on the program algorithm. The control
program created in the LabVIEW software environment must pass the testing and after
that can made conclusions about program control capability of the synthetic generator.