Otsi
1.-6. nimetus 6-st
Determination of Residual Stresses in Brush-Plated Coatings by Mechanical and X-ray Techniques
(Linköping University, Department of Mechanical Engineering, Division of Engineering Materials, 1997)
The determination of residual stresses is studied in brush-plated nickel coatings of different thickness, deposited on brass strip substrates with two different dimensions. Residual stresses in the surface layer were found ...
Determination of Residual Stresses in Inhomogeneous Plates With Layer Growing/Removing Techniques
([Warsaw University of Technology], 1998)
A generalized algorithm of the layer growing/removing methods is presented for computing residual stresses in a free rectangular isotropic inhomogeneous plate whose elastic parameters depend on its thickness coordinate. ...
Determination of Residual Stresses in the Coat Deposited bt Brush Plating
(DGM Informationsgesellschaft, 1993)
The method of continuous growth described in the article enables the determination of initial stress in the brush plated coat by the circumferential strain of the short thin-walles cylindrical cathode. The Tihonov´s method ...
Modelling of Residual Stresses by Photoelastic Method during the Coating Deposition
(DGM Informationsgesellschaft, 1993)
A calculating scheme according to which the process of material growth is regarded as a continuous growth of the equidistant to interface elementray layers with initial stresses is widely used for determination of residual ...
On Determination of Residual Stresses in Deposits by Measuring the Bending of a Thin-Walled Substrate in the Form of a Curvilinear Strip
(Copenhagen : Danmarks Tekniske Højskole , Afdelingen for Boerende Konstruktioner, 1990)
The paper deals with a perfected theory of determination of initial residual stresses in a deposit by measuring the angular deflection of free end of a substrate in the form of a helical warping strip. Unlike the theory ...
Study of deformations of thermobimetallic straight strips under heating using the holographic interferomentry method : [full text in Russian]
(Киев : Наукова думка, 1991)
The method of interference holography is used to study deformation of plane thermobimetallic springs under uniform variation of temperature. It is established that free springs with thickness/width ration 1/20 and width/length ...